MLH1 Results Outline
09 February 2020
Average MLH1 Count Model
These are the basic Mixed Models we used as a frame work to analyze all the MLH1 count data.
\[mouse \ av.\ metric ~=~ subsp * sex + rand(strain) + \varepsilon \]
The mixed model lets us separate effects to see how they effect a mouse mean CO count. The subspecies effect is a proxy for Divergence and the random strain effect is a proxy for Polymorphism.
Setting up the data set for using the mixed model (base data set, HQ data set)
only Mus musculus strains with sex matched observations
Male gwRR have been adjusted for the PAR
Q5 excluded
All the effects are un-ordered factors
male ages within 5 - 20 weeks
Molossinus is coded as a subsp level
This is the break down of mice used within the Mixed model
| WSB | G | LEW | PWD | MSM | MOLF | SKIVE | KAZ | |
|---|---|---|---|---|---|---|---|---|
| female | 14 | 12 | 9 | 15 | 14 | 1 | 1 | 9 |
| male | 10 | 11 | 7 | 8 | 4 | 6 | 5 | 11 |
subspecies levels: 3, Musc, Dom and Molossinus
strain levels: Dom: 3, Musc: 3 Mol: 2
sex: 2 female male
For now I will focus on 3 different models for comparing the subsp, sex and strain effects across relevant dependent variables.
- \[mouse \ av \ meteric ~=~ subsp * sex + rand(1|strain) + \varepsilon\]
Allows random effect from strain. Considers the wild derived inbred strains as random samples from each subspecies territory.
- \[mouse \ av \ meteric ~=~ subsp * sex * strain + \varepsilon\]
Post hoc model for investigating strain as a fixed effect.
- \[mouse \ av \ meteric ~=~ sex * strain + \varepsilon\]
Used after it’s apparent strain has a significant effect - another post-hoc examination for strain as a fixed effect.
MLH1 count M1
\[mouse .mean CO ~=~ subsp * sex + rand(1|strain) + \varepsilon\]
##
## simulated finite sample distribution of RLRT.
##
## (p-value based on 10000 simulated values)
##
## data:
## RLRT = 26.933, p-value < 2.2e-16Above is the mixed model M1,
MLH1 count M2
\[mouse \ av \ metric ~=~ subsp * sex * strain + \varepsilon\]
Above is the table of coefficients for MM.3, HQ data set, lm function, sex, strain and subsp are interacting fixed effects.
Strain G is significant (p=0.0005),
interaction terms of sex and strain for (G, MSM, PWD).
How are these models different from the last one – MM4 is missing subsp, so only sex * strain effects.
MLH1 count M3
\[mouse \ av \ metric ~=~ sex * strain + \varepsilon\]
Summary of Mixed models
Within Mouse Variance in CO Count per Cell
Histograms might not be the best way to represent, but they show the general pattern than female mice have higher within mouse variation for CO counts.
A general pattern is that the female data has higher within mouse variance (both var and cV). Some strains more than others (investigate potential outliers). (LEW females with top 3 variance are all from different dissection dates) This pattern also holds for within mouse cv for MLH1 count (not shown).
todo
Test if dissection date is more significant predictor than strain (for females) (Effect doc) Also test how the number of 0CO bivalents per cell affects mouse with variance. (lm)
Modeling Within Mouse Variance
(use the same models are mean_co, )
XXX (old 1.) HetC.MixedModel.HQ <- lme(mouse.metric ~ subsp*sex, data=DF.HetC.MixedModel.HQ, random=list(strain=pdDiag(~sex) ) )
1.(new 1) Reduced.strain.HQ <- lmer(mouse.metric ~ subsp * sex+ (1|strain), data=DF.HetC.MixedModel.HQ)
lm(mouse.metric ~ subsp * sex * strain, data=DF.HetC.MixedModel.HQ)
lm(mouse.metric ~ sex * strain, data=DF.HetC.MixedModel.HQ)
MLH1 variance M1
\[mouse metric ~=~ subsp * sex + rand(strain)+ \varepsilon\]
The fixed sex effect has the largest effect sizes. All are negative (for male). (I’m not sure if I should switch to testing the additive fixed effects by themselves) - I’m pretty sure the outcome would be that the sex effect gets very large in those models. The strain effects are only slightly significant for within mouse variance measures in the full data set (includes low quality cells)
MLH1 variance M2
\[mouse CO metric ~=~ subsp * sex * strain + \varepsilon\]
For LEW - females must have high variance, for CV Lew strain alone has increased cv. Consider plotting the variance - and diving deeper into this pattern Most of the strain specific differences in within mouse variance go away in the Q12 data set.
MLH1 variance M3
\[mouse \ CO \ metric ~=~ subsp * sex * strain + \varepsilon\]
Summary witin mouse Variance
The general pattern across all the models, is that sex is a significant effect for all models. The sex-subsp interaction effect p values were larger and only significant for one of the models.
(some strains have significant effect – some LEW females had large leverage).
Summary of Mixed Model Analyses
mouse average MLH1 count
Multiple models were tested to test for potential evo models – for the mouse average CO counts. (there were a mix of results – and nuanced)
First full Mixed model – no significant fixed factors –(the random effect might be significant).
The second model were strain was (nested and random), the fixed effects, sex and interaction of (subsp and sex), are much more significant. The coefficients indicate, males in general have 1 less in average, and the musc and molf subsp have ~3 more on average.
Variance effect
** Do these patterns hold across Quality bins? **
Female Specific Polymorphism
I should run the same questions for the female data –
##
## WSB G LEW PWD MSM MOLF SKIVE KAZ CAST
## 14 12 9 15 14 1 1 9 1
Male Specific Polymorphism
Follow up on this finding – included more strains which were excluded from the HetC analysis.
Is there a strain effect in Dom?
How different are the Musc strains?
test a model for fixed effects of strains within musc. The purpose is to distinguish musc strains from low ‘Dom’ level strains.
## Warning: Removed 1 rows containing missing values (geom_point).
(Try removing the alpha legend)
This is the table and plot of new Musc strains
| Var1 | Freq |
|---|---|
| PWD | 8 |
| SKIVE | 6 |
| KAZ | 13 |
| TOM | 2 |
| AST | 3 |
| CZECH | 3 |
Given the plot, make note of the potential outlier mice. The strains have unequal variance
KAZ: 10jul19_KAZ_m3, 10jul19_KAZ_m1, 10jul19_KAZ_m2
PWD: 24sep14_PWD_m1, 18may15_PWD_m1?
## [1] 24.33801msm, pwd skive are when all other male strains are added. skive is less sig than the others – but it’s still sig. Given these results I can group SKIVE, PWD and MSM into the ‘high rec’ group.
PWD, MSM, SKIVE are in ‘high rec group’
Proportion of chromosome classes
These results are meant to compare the proportions of bivalents with 0,1,2 or 3 chromosomes. Most of the variation in gwRR across strains in is due to more 2COs at the ‘expense’ / trade off of 1COs. (the gwRR for most mice is low/close to the minimum)
The data below are from hand measured cells (not from bivalent data) generate smaller data set of chrm proportions (0CO, 1CO,2CO etc) 10 cells from each musc category. Add Molf female
## Warning: Removed 39 rows containing missing values (geom_col).
For following up on the biv stuff, find ways to compare the 1CO to 2COs in Dom and Musc. (sis-coten, length, distance from centromere).
The figure below shows the average percentages of chromosome classes per category gathered from BivData
These results align with the previous figure I made using percentages from hand measured results (dozens of observations, instead of hundreds). These results fit with the rapid male evolution of gwRR in MSM and PWD.
Look into ordering the mouse strains to highlight the MSM and PWD differences, renaming the chrm type labels, spacing out the x axis labels or removing some of the other mice.
DMC1 Results, Spermatocytes
These data are meant to test if CO precursors, double strand breaks (DSBs), are significant predictors for MLH1 count variation. Simply, do mice with more DSBs also have more COs?
ToDo: - attempt to supplement data with more KAZ DMC1 cell observations. - change all the bad variable names
The counts look close to normal.
Potentially figure 2. Using a function to display the p-vales for mean comparison
Summary:
The distributions of counts is close to normal (also the higher count is better than the MLH1 counts)
Above figure shows p-values for comparison of means across the cell stages.
Foci of DMC1 were scored from Leptotene and Zygotene spermatocytes of juvenile mice (12-14-18 days). One mouse represents each strain. The main comparison to examine is that between the high (PWD and MSM) and low recombining (WSB, G, KAZ) strains.
ToDo think of ways to add in the compared means for the high and low groups (across cell stage) how similar are G-WSB or PWD-MSM to each other?
DMC1 Permutations with equal sampling
The number of observations are not quite equal across strains and cell stages, so I ran permutations sampling 25 cells from the high and low recombining groups of cells. Below are the distributions of p values for permuted t-tests from sampling 25 cells from the pooled high and low recombining groups. Permutations were done for both cell stages. The actual p value is in red.
The observed p value does not fall outside of the permuted distribution with assumes equal cell sampling.
At what stage are DMC1 foci numbers most correlated with MLH1?
The correlation with MLH1 and leptotene cells is 0.8736143.
The correlation with MLH1 and zygotene cells is 0.284302.
Evidence for non-equal variance across strains for zygotene cells.
Ideas for post-hoc tests, remove strains 1 at a time and test variance. Test variance for L cells without KAz.
From ANOVA analysis strain is significant for Leptotene cells but not Zygotene cells. (but take these results with a grain of salt before assumptions are tested.)
Divide the Musculus strains into high and low recombining groups to characterize the difference in distributions. The p-values from the t.tests of the high vs low groups, indicate that the high recombining are significantly higher for the L cells (p value = r ttest.HighLow.L\(p.value) while the Z cells, there is not a significant difference across the high and low groups (value = r ttest.HighLow.Z\)p.value).
Note on Heterochiasmy Definition
I present heterochiasmy as a comparison of oocyte to spermatocyte MLH1 counts, but the sex chromosomes/bivalents complicate this comparison. In females the XX bivalent is indistinguishable from the autosomes. To the meiotic recombination machinery, it is an autosome and has a similar REC landscape. Whereas in spermatocytes the XY bivalent is visually distinct and any MLH1 where not included in the count). (I note if the and Y are paired, which they are at a high rate). The XY pair triggers a response to un-paired chromosomes and only has MLH1 foci within the PAR (the the tips of X and Y). To make a more equivalent comparison I will estimate which bivalent is the XX in oocytes, and subtract that average REC from the category average of each strain.
- Compile full-cell data from females (all 20 bivalents measured)
- Look at the SC length -ranked data, extract the 3rd longest estimate average REC for this bivalent,
- check how variable the REC is across the 1st,2nd,4th, and 5th are.
According to mouse genome website, the X is the 3rd largest chromosome by total amount of DNA (Mb).
(Put the XX adjustment section here)
There is now MOLF, which has female biased hetC 3 of my Musc strains have male biased patter; SKIVE, PWD and MSM. 1 of the musc strains has female biased heterochiasmy, KAZ.
The mouse specific scatter plots aren’t show here because there are too bulky. These plots are in a different document.
Making all of these scatter plots, allows us to look at the whole distributions of the data for each mouse. The distance of the red line from the black could be a indicator of slides or mice with slide specific technical noise.
Single Bivalent Level Results
Bivalent level traits and metrics have been added in the src/Setup_BivData.Rmd script. These observations are from the automated image analysis algorithm and have been curated (threw out incorrect algorithm output). The MLH1 data file is also loaded into this file.
The breakdown of single bivalent observations by category
Two Main questions for these analyses.
Q1. driving questions, which traits are sexually dimorphic?
Q2. which traits fit male polymorphism predictions?
These questions use different datasets, q1 sex matched strains
Q2 all male observations with including strains not in the q1 data set
Model Frameworks
Q1. Model 1, mixed model lmer()
\[mouse \ av.\ metric ~=~ subsp * sex + rand(strain) + \varepsilon \]
Q1. Model 2, glm() \[mouse \ av.\ metric ~=~ sex * strain + \varepsilon \]
Q2 Model 1, mixed model lmer()
\[mouse \ av.\ metric ~=~ subsp * + rand(strain) + \varepsilon \]
Q2 Model 2, glm()
\[mouse \ av.\ metric ~=~ strain + \varepsilon \]
Q2 Model 3, logistic regression
\[Rec \ group ~=~ mouse \ av.\ metric \]
I decided to use the mouse averages for most of the bivalent metric tests. some of my logic is below.
Pro Bivalent level
The data are continuous and closer to normal/Gaussian expectations than the MLH1 counts.
There is within cell variance that is an issue (would affect single bivalent observations).
Pro Mouse averages
Mouse average is a conservative choice, it would summarize general patterns which fits with the paper.
Simple application of the same models as MLH1 based results.
Limited work to add to the data set if I can justify that the collection of single bivalents are random and equivalent across mice.
So I’ll use the mouse averages for all the metrics is what is used in the mixed models.
In the chunk above the mouse averages table is made – may need to add all the extra metrics (IFD, .
Q1 Analysis, Predictions for Heterochiasmy Q1
Using the Mixed model framework which tests the effects (and interactions) of subspecies, sex and strain, I will test for evolution of the following traits.
Two bivalent level traits are predicted to display heterochiasmy (ie significant effects of sex);
- SC length will be sexually dimorphic (sex effect will be significant)(cite Lynn)
2.A) Normalized 1CO positions will be sexually dimorphic (sedell and Kirkpatrick).
sister cohesion tension (sis-co-ten) will be sexually dimorphic as it reflects the general property of uniform vs telomere/biased CO positioning.
Centromere and telomere distances will be sexually dimorphic.
- Interference / IFD will not be sexually dimorphic. Previous physical measures of interference were not different between sexes (verify petkov 2001).
Q1 SC Lengths
We expect female SC lengths to be longer (refs). In the plot above the SC length ~ higher hand foci cells. Any of the chromosome classes above 3, that don’t have a higher mean are likely due to low data number. For the 0 class chromosomes most all are around the same size of the 1CO distribution. Add in the code for the plot under 2COs males and females
M1. subsp * sex + (strain)
M2 subsp * sex * strain (don’t rally use)
M3 sex * strain
The dependent variables I’ll be testing in the model framework are:
Pooled SC lengths
1CO
2CO
3CO
Xlong.biv *Don’t do long bivData for testing sex effect, since this would have the XX
Short.biv dataset *this would be a chrm size effect, without the XX
\[mouse \ average \ SC \ length ~=~ subsp * sex + rand(strain) + \varepsilon \]
Q1.SC_HetC_M1
Insert the results for the MMs using the dependent variable 1CO - use the Mixed model (lmer), for all of the metrics (pooled SC, 1CO 2CO ect)
Below’s the code for Mixed model results – try to organize them into a table or something
##
## simulated finite sample distribution of RLRT.
##
## (p-value based on 10000 simulated values)
##
## data:
## RLRT = 6.0335, p-value = 0.0042##
## simulated finite sample distribution of RLRT.
##
## (p-value based on 10000 simulated values)
##
## data:
## RLRT = 4.2988, p-value = 0.0133##
## simulated finite sample distribution of RLRT.
##
## (p-value based on 10000 simulated values)
##
## data:
## RLRT = 0.074804, p-value = 0.3099The fixed sex effect is highly significant for the mouse means of SC length. The data sets tested were all pooled SC lengths, the long bivalents, 1CO and 2CO seperately.
Q1. SC_HetC_M2
All fixed and all interactions
## Warning: Removed 1 rows containing non-finite values (stat_boxplot).## Warning: Removed 1 rows containing missing values (geom_point).
I think the strange thing about the Musc is that Skive females have shorter SC lengths.
Strain Comparisons of SC Length
Dive deeper into the sex specific pattern for each strain. (I think for all the within strain comparisons across sexes the general pattern is met of females being longer)
(adding all of these blocks to – the setup script); strain.Bivalents.DF
Q1. IFD
Brief lit review for IFD / interference expectations
Petkov et al 2007, CO interference underlies sex differences in RR
“Here we show that in mice, this is because of a shorter genomic interference distance in females than in males, measured in Mb. However, the interference distance is the same in terms of bivalent length. We propose a model in which the interference distance in the two sexes reflects the compaction of chromosomes at the pachytene stage of meiosis.”
Chrm1 genetic map,
(other human and mice refs
Tease n Hulten 2004: – no difference between MLH1 foci in males and females
DeBoer 2006, 13 – measured chrm 1 in males and females, both were 2.8 microns
))
Do I believe the physical/SC results?
- Interference / IFD will not be sexually dimorphic.
B.1) Interfernce/IFD will be shorter in high Rec strains to allow more foci to fit on a single bivalent.
Interfocal Distance, a indication of CO interference.
The raw measures are pretty nosy, this might not be the best way to display these results.
Each point is a IFD observation. Maybe add mouse level lines for the means.
Still working on the best way to display the general IFD patterns.
Mixed Model Tests, Fixed Effects
Mixed model analysis for IFD (interference), the first set of models are made with the lme() functions.
\[mouse \ average \ IFD ~=~ subsp * sex + rand(strain) + \varepsilon \]
IFD_HetC_M1
## boundary (singular) fit: see ?isSingularSex is a slightly significant factor for raw and normalized IFD.
The table above should display the slightly unusual pattern, where the coefficients for the significant sex fixed effect are positive and negative in the raw and normalized values respectively. That is for the raw IFD values, females are significantly longer but the normalized IFD values, males are significantly longer.
show a raw plot, and norm plot and a scatter plot
I tested 2 versions of the mixed model for this flavor of trait, raw IFD and normalized IFD measure. The tables below are from anova( for the lmer model ). Random effect of strain is not significant for ABS IFD, and only slightly significant for the IFD.PER
IFD_HetC_M2
IFD_HetC_M3
Strain Comparisons
Dive deeper into the sex specific pattern for each strain. Below are code chunks which show the unusual sex specific results for IFD measures. The general pattern is that, female raw IFD > male IFD and female PER IFD < male PER IFD. The scatter plots show that female raw measures are longer than male and for the PER values, the female mean is brought down by an enrichment of short IFDs.
For some strains, PWD, MSM and SKIVE there’s a 30% threshold in the male PER IFD distributions. (What does that mean?). How do I test / quantify this pattern? Cluster metric?
Above is a table of the proportion of 2Co bivalents which have a norm IFD below 30%, For all strains but KAZ, the females have a greater proportion of these shorted IFD values.
The range of normalized IFDs overlap closer in males and females in the WSB data.
The Lew pattern doesn’t have a clean cut off of nrm.IFD. the range of male and females overlap, but there are more female observations below.
For PWD, there are a few observations of the short IFDs for males, but there seems to be a cut-off / threshold at .3
For the KAZ, pattern the distinction between the male and female pattern is less distinct. There are fewer instances of females with v close IFD distances.
In the Skive data, it could be the case that the v. short IFD measures in females are rare / another class of observations.
The MSM pattern has a short range and longer range of nrm.IFD in males and females respectively.
##
## 0 1 2 3
## female 0 0 0 0
## male 9 326 97 5The strains which show a clean “30% threshold” for normalized IFD in males are: PWD, SKIVE, and MSM (which are the 2 high Rec and a intermediate strain). The other strains which have more overlap between males and females are the Dom strains and KAZ.
IFD 3CO bivalents
Run comparisons for 3CO bivalents.
Q1. General CO Positions
There are a few traits that fall within the CO positions
1CO normalized position
sis.co.ten (sorta interference)
centromere and telomere distance
Heterochiasmy
2.A) Normalized 1CO positions will be sexually dimorphic (sedell and Kirkpatrick).
sister cohesion tension (sis-co-ten) will be sexually dimorphic as it reflects the general property of unifrom vs telomere/biased CO positioning.
Centromere and telomere distances will be sexually dimorphic.
Q1. Normalized 1CO positions
**for all the test blocks below, integrate the 3 other metrics; siscoten, telomere, centromere distance.
Above plot focuses on the 1CO bivalent normalized positions since CO interference controls the general position of COs when there are multiple COs. This plot shows the sexual dimorphism in the density plots.
Consider adding annotate_text for the number of observations in each category. think about adding a vertical line for centromere, for the position means. Think about removing the extra Musc strains.
These box plot show that females have a much more medial position of single foci bivalents, (much closer to 50% compared to males). They also show that Musc males’ Foci1 position is slightly more central / medial compared to the same type of positions in the Dom male strains. MOLF males have much more medial positions than other strains.
Mixed models norm 1CO positions
the distribution of SC lengths and sis-coten seems very different across sexes
\[mouse \ average \ F1 position ~=~ subsp * sex + rand(strain) + \varepsilon \]
The mixed model data should only come from 1CO bivalent data.
Nrm_1COpos_HetC_M1
the mouse average foci1 pos is more significant in t.test, but not log regression… (is something wrong?) Check the mouse averages for the F1_pos, there might be an outlier or mouse with v.few observations.
Nrm_1COpos_HetC_M2
Siscoten
The metric Sis-co-ten measures the amount of sister cohesion connected to the other pole.
The logic of how the sis-co-ten metric is outlined in the figure below. The goal is to use this metric to model different tension active cohesion amounts as a consequence of different numbers and placements of chiasmata/CO. This metric is calculated using SC area as a proxy to the amount of cohesion at metaphase.
from (Lee, J. (2019). Is age-related increase of chromosome segregation errors in mammalian oocytes caused by cohesin deterioration?. Reproductive Medicine and Biology.)
## Warning: Removed 133 rows containing missing values (geom_point).
## Warning: Removed 46 rows containing missing values (geom_point).
Males have much clearer separation of siscoten across chrm classes. This is emphasized when SC length is also plotted. It seems like musc males have higher amounts of this metric compared to Dom males.
To formally test the differences in sis-co-ten I plan to write a sub sampling / permutation loop to compare the mean(sis.co.ten) of the same numbers of bivalents of the same class.
BUT females have a greater range – so maybe it’s just a scale issue.
## Warning: Removed 24 rows containing missing values (geom_point).
## Warning: Removed 21 rows containing missing values (geom_point).
## Warning: Removed 12 rows containing missing values (geom_point).
## Warning: Removed 16 rows containing missing values (geom_point).
## Warning: Removed 23 rows containing missing values (geom_point).
## Warning: Removed 16 rows containing missing values (geom_point).
## Warning: Removed 8 rows containing missing values (geom_point).
I think the the normalized sis.co.ten plots also show that the there is more clustering of the sis.co.ten for the males.
The fixed effects, sex and sex*subsp are significant. The random strain effect is also significant.
Is the heterochiasmy prediction met?
Yes, model predicting the mouse average siscoten, sex and sex-subp interaction are significant factors. The Random strain effect is also significant.
##
## Call:
## glm(formula = Rec.group ~ mean.siscoten, family = binomial(link = "logit"),
## data = Male.poly.Mouse.Table_BivData_4MM[(Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Musc"), ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.52564 -0.06612 0.00415 0.07733 1.40452
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -47.2084 30.9084 -1.527 0.127
## mean.siscoten 1.4513 0.9482 1.531 0.126
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 22.9145 on 17 degrees of freedom
## Residual deviance: 5.2122 on 16 degrees of freedom
## AIC: 9.2122
##
## Number of Fisher Scoring iterations: 9##
## Call:
## glm(formula = Rec.group ~ SisCoTen, family = binomial(link = "logit"),
## data = Curated_BivData[(Curated_BivData$subsp == "Musc") &
## (Curated_BivData$sex == "male"), ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.2386 -0.8621 -0.7251 1.3557 1.7917
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -1.410699 0.087585 -16.107 < 2e-16 ***
## SisCoTen 0.014936 0.001939 7.701 1.35e-14 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 2761.4 on 2269 degrees of freedom
## Residual deviance: 2701.2 on 2268 degrees of freedom
## (37 observations deleted due to missingness)
## AIC: 2705.2
##
## Number of Fisher Scoring iterations: 4All the sis.co.ten tests are highly significant. Maybe I should consider running a normalized sis.co.ten? I think nrm_siscoten would still reflect the differing cohesion structure/outcome.
Telomere and centromere Distance
My metric for telomere and centromere distance measure the distance of the nearest foci to the ends of the bivalent (SC). In the plots below each point is a single bivalent. I choose not to use the mark for centromere because it seems noisy and inconsistent…
## Warning: Removed 79 rows containing missing values (geom_point).
## Warning: Removed 79 rows containing missing values (geom_point).
Males on average have much lower raw telomere distance (reflects the telomere bias) compared to females. In Males, 2CO bivalents have very low telomere distances, while the 1CO bivalents have a greater range. In females the ranges of telomere distances have much more overlap.
##
## simulated finite sample distribution of RLRT.
##
## (p-value based on 10000 simulated values)
##
## data:
## RLRT = 6.7045, p-value = 0.0031Mixed model result summary:
##
## Call:
## glm(formula = Rec.group ~ mean.telo.dist, family = binomial(link = "logit"),
## data = Mouse.Table_BivData_4MM[(Mouse.Table_BivData_4MM$subsp ==
## "Musc") & (Mouse.Table_BivData_4MM$sex == "male"), ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.8147 0.4434 0.5946 0.7428 0.8505
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) 4.5876 5.9959 0.765 0.444
## mean.telo.dist -0.1719 0.3153 -0.545 0.586
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 15.012 on 14 degrees of freedom
## Residual deviance: 14.673 on 13 degrees of freedom
## (10369 observations deleted due to missingness)
## AIC: 18.673
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = Rec.group ~ telo_dist, family = binomial(link = "logit"),
## data = Curated_BivData[(Curated_BivData$subsp == "Musc") &
## (Curated_BivData$sex == "male"), ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -0.8703 -0.8526 -0.8231 1.5327 1.7629
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -0.775595 0.069867 -11.101 <2e-16 ***
## telo_dist -0.004915 0.002607 -1.886 0.0593 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 2790.4 on 2303 degrees of freedom
## Residual deviance: 2786.7 on 2302 degrees of freedom
## (3 observations deleted due to missingness)
## AIC: 2790.7
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = Rec.group ~ telo_dist_PER, family = binomial(link = "logit"),
## data = Curated_BivData[(Curated_BivData$subsp == "Musc") &
## (Curated_BivData$sex == "male"), ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -0.9024 -0.8669 -0.8050 1.5031 1.7751
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -0.68815 0.07215 -9.538 < 2e-16 ***
## telo_dist_PER -0.74487 0.22630 -3.292 0.000996 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 2790.4 on 2303 degrees of freedom
## Residual deviance: 2779.2 on 2302 degrees of freedom
## (3 observations deleted due to missingness)
## AIC: 2783.2
##
## Number of Fisher Scoring iterations: 4## Warning: Removed 126 rows containing missing values (geom_point).
## Warning: Removed 126 rows containing missing values (geom_point).
## Warning: glm.fit: algorithm did not converge## Warning: glm.fit: fitted probabilities numerically 0 or 1 occurred##
## Call:
## glm(formula = Rec.group ~ mean.cent.dist, family = binomial(link = "logit"),
## data = Mouse.Table_BivData_4MM[(Mouse.Table_BivData_4MM$subsp ==
## "Musc") & (Mouse.Table_BivData_4MM$sex == "male"), ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -6.308e-05 2.100e-08 2.100e-08 2.100e-08 6.409e-05
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) 3373.04 1607241.50 0.002 0.998
## mean.cent.dist -79.92 38084.76 -0.002 0.998
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 1.5012e+01 on 14 degrees of freedom
## Residual deviance: 8.0864e-09 on 13 degrees of freedom
## (10369 observations deleted due to missingness)
## AIC: 4
##
## Number of Fisher Scoring iterations: 25##
## Call:
## glm(formula = Rec.group ~ dis.cent, family = binomial(link = "logit"),
## data = Curated_BivData[(Curated_BivData$subsp == "Musc") &
## (Curated_BivData$sex == "male"), ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.0416 -0.8807 -0.7682 1.4201 2.0345
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -0.376794 0.093059 -4.049 5.14e-05 ***
## dis.cent -0.012908 0.002227 -5.797 6.74e-09 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 2764.5 on 2271 degrees of freedom
## Residual deviance: 2729.5 on 2270 degrees of freedom
## (35 observations deleted due to missingness)
## AIC: 2733.5
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = Rec.group ~ dis.cent.PER, family = binomial(link = "logit"),
## data = Curated_BivData[(Curated_BivData$subsp == "Musc") &
## (Curated_BivData$sex == "male"), ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.1170 -0.8901 -0.7148 1.3584 1.8641
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -0.2106 0.0935 -2.252 0.0243 *
## dis.cent.PER -1.3810 0.1795 -7.694 1.42e-14 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 2764.5 on 2271 degrees of freedom
## Residual deviance: 2703.5 on 2270 degrees of freedom
## (35 observations deleted due to missingness)
## AIC: 2707.5
##
## Number of Fisher Scoring iterations: 4The normalized centromere plots show that in Musc males, on 2CO bivalents the 1st CO is closer to the centromere end than in Dom males.
Females have more overlap in the distributions of centromere distances across chromosome class compared to males.
Heterochiasmy Prediction
Is sex a significant effect for the 1CO normalized CO position? (as predicted)
is random strtain effect significant?
The random strain effect seems very significant.
remember to use the mouse average table mouse.avs_4MM (I don’t think I need the MELT data frame)
#make point plots / boxplots which show differences in mean positions
#scatter + boxplot for t.testsDr. Broman suggested that the Smirnov K /(curve comparison) wasn’t the best test to differences in general CO position. He suggested doing simple t-test for the positions
#try remaking the plot Megan suggested
# for 2CO positions, Foci1, Position on x and Foci 2 position on y
CurBivData_2CO <- Curated_BivData[Curated_BivData$hand.foci.count == 2,]
CurBivData_2CO <- CurBivData_2CO[!(is.na(CurBivData_2CO$Foci2) | CurBivData_2CO$Foci2==""), ]
#isolate 2COs
#facet by sex and subsp
F1.x.F2 <- ggplot(CurBivData_2CO, aes(x=Foci1,y=Foci2, color=strain) ) + geom_point()+ facet_wrap(~sex)+ggtitle("test plot")
F1.x.F2
#what is the pattern of variance
#run analyses for each subsp*sex
#use non-melt DF
#how is the variance partioned across
#cell, mouse, strain
female.Dom <- Curated_BivData[Curated_BivData$sex == "female",]
female.Dom <- female.Dom[female.Dom$subsp == "Dom",]
female.Dom$Foc1.PER <- female.Dom$Foci1 / female.Dom$chromosomeLength
#unorder strain and mouse
female.Dom$mouse <- as.factor(female.Dom$mouse)
female.Dom$strain <- unclass(female.Dom$strain)
female.Dom$strain <- as.factor(female.Dom$strain)
female.Dom_1CO <- female.Dom[female.Dom$hand.foci.count == 1,]
female.Dom_1CO <- female.Dom_1CO[(!is.na(female.Dom_1CO$hand.foci.count)),]
#1CO first
modo <- lm(Foc1.PER ~ fileName + mouse + strain, data=female.Dom_1CO)
#can't get mouse and strain to have sum of square
#residual size decreases with per.F1
#residuals much larger than fileName, mouse and strain no
#model <- lm(breaks ~ wool * tension,
# data = warpbreaks,
# contrasts = list(wool = "contr.sum", tension = "contr.poly"))
male.Dom <- Curated_BivData[Curated_BivData$sex == "male",]
male.Dom <- male.Dom[male.Dom$subsp == "Dom",]
male.Dom$mouse <- as.factor(male.Dom$mouse)
male.Dom$strain <- unclass(male.Dom$strain)
male.Dom$strain <- as.factor(male.Dom$strain)
male.Dom <- male.Dom[male.Dom$hand.foci.count == 1,]
male.Dom <- male.Dom[(!is.na(male.Dom$hand.foci.count)),]
male.Dom$Foc1.PER <- male.Dom$Foci1 / male.Dom$chromosomeLength
male.modo <- lm(Foc1.PER ~ fileName | mouse | strain, data=male.Dom)
summary(aov(male.modo))
#only file name is registering as effect
#Review ANOVA frameworks
#http://www.biostathandbook.com/nestedanova.htmlQ2 Analysis Predictions, Male Polymorphism and (High vs Low Rec strains)
The general predictions across the males and subspecies based on th above MLH1 results.
For positive correlation traits/metrics
in DOM strains, low to no difference across strains
in Musc, PWD > SKIVE > KAZ, CZECH all the others
in Mol, MSM > MOLF
- SC lengths will be longer for high Rec strains.
B.1) Interfernce/IFD will be shorter in high Rec strains. Use IFD_PER to account for SC length differences.
C.1) not enough is known about variation within species for the 1CO normalized positions. Null prediction, no difference in the ‘telomeric pattern’.
The mouse averages for the other position metrics will be highly influenced by proportions of the 1CO and 2CO bivalents. When class of chromosome and SC length is account for, there won’t be a difference, however, not enough is known about these patterns.
C.2) sis-co-ten metric … (what about the clustering?)
C.3) telomere and centromere distances …
M1 glm model for fixed strain effect across male averages.
Q2 SC
remember the 3 predictions for subsp;
Dom, no difference
Musc, PWD and SKIVE greater than others
Mol, MSM > MOLF
Using the mouse average SC lengths, in the full data set all strain effects are significant. This is an indication that there is more variation for the SC lengths than for gwRR / CO counts.
The general pattern is that the high rec strain have a greater mean SC length for all pooled bivalents (5046 males bivalent observations).
Q2 SC by class
The predicted pattern for SC length becomes more nuanced when the data are split up by Chromosome class. Mainly that 1CO are shorter in the high rec strains then low rec strains. This is likely due to the fact that more physically longer chromosomes have 1CO in the low rec strains, which pushes the mean SC length up. Where as in the High rec strains, physically longer chromosomes are more likely to be in the 2CO group. This supports a general pattern of tighter clustering of SC lengths across chromosome classes in the high rec group. They have a lower probability of 2COs below a certain SC length threshold.
I think these comparisons should be done with the Bivalent observations The logistic regression showed rec groups could be predicted by SC length - re-run them while separating out by chrm class
##
## Call:
## glm(formula = chrm.class ~ chromosomeLength * strain, family = binomial(link = "logit"),
## data = Bivalent_1o2)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -2.3243 -0.6900 -0.4696 0.5792 2.6840
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -6.267440 0.621154 -10.090 <2e-16 ***
## chromosomeLength 0.062024 0.007516 8.252 <2e-16 ***
## strainG 0.486532 0.777194 0.626 0.5313
## strainLEW 0.159705 0.888083 0.180 0.8573
## strainPWD 1.138253 0.774194 1.470 0.1415
## strainMSM 2.167164 1.100226 1.970 0.0489 *
## strainMOLF 1.161952 0.905552 1.283 0.1994
## strainSKIVE 0.277228 0.786861 0.352 0.7246
## strainKAZ 1.331861 0.871914 1.528 0.1266
## strainCZECH 0.578077 1.102026 0.525 0.5999
## chromosomeLength:strainG -0.012078 0.009075 -1.331 0.1832
## chromosomeLength:strainLEW -0.004447 0.010417 -0.427 0.6695
## chromosomeLength:strainPWD -0.005375 0.009126 -0.589 0.5559
## chromosomeLength:strainMSM -0.013466 0.012688 -1.061 0.2886
## chromosomeLength:strainMOLF -0.016616 0.010457 -1.589 0.1121
## chromosomeLength:strainSKIVE 0.001995 0.009369 0.213 0.8314
## chromosomeLength:strainKAZ -0.025109 0.010078 -2.491 0.0127 *
## chromosomeLength:strainCZECH -0.011721 0.012328 -0.951 0.3417
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 5617.8 on 4909 degrees of freedom
## Residual deviance: 4553.7 on 4892 degrees of freedom
## AIC: 4589.7
##
## Number of Fisher Scoring iterations: 5These are the plots of the logistic regression.
the plot of log regression for 1COs is wacky/reversed. Musc – the mean SC lengths for 1COs are longer in the low group
## [1] 0.002380373## [1] 0.999271## [1] 0.03427751The top t.tests indicate that when all the mice averages are pooled, there’s a significant difference in SC lengths. But When the means are compared across chrm class, the mouse averages are no longer significant.
Q2 SC length Chrm class prediction
How well does SC length predict chromosome class? Prediction, High rec strains will have more significant p value, given the lower overlap in SC lengths across chrm class. (Note this test can only be done with bivalent level observations, because 1CO or 2CO)
##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.9696 -0.7459 -0.5069 0.7601 2.5488
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -5.545924 0.187360 -29.60 <2e-16 ***
## chromosomeLength 0.053119 0.002097 25.33 <2e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 5617.8 on 4909 degrees of freedom
## Residual deviance: 4806.9 on 4908 degrees of freedom
## AIC: 4810.9
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_WSB)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.5319 -0.6194 -0.4507 -0.2544 2.5795
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -6.267440 0.621154 -10.090 <2e-16 ***
## chromosomeLength 0.062024 0.007516 8.252 <2e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 554.21 on 578 degrees of freedom
## Residual deviance: 469.39 on 577 degrees of freedom
## AIC: 473.39
##
## Number of Fisher Scoring iterations: 5##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_G)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.5583 -0.6425 -0.4673 -0.2974 2.6141
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -5.780909 0.467117 -12.376 <2e-16 ***
## chromosomeLength 0.049946 0.005085 9.822 <2e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 943.65 on 979 degrees of freedom
## Residual deviance: 829.78 on 978 degrees of freedom
## AIC: 833.78
##
## Number of Fisher Scoring iterations: 5##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_LEW)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.7127 -0.6509 -0.4601 -0.2709 2.6840
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -6.107735 0.634711 -9.623 < 2e-16 ***
## chromosomeLength 0.057577 0.007213 7.982 1.43e-15 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 523.62 on 514 degrees of freedom
## Residual deviance: 442.66 on 513 degrees of freedom
## AIC: 446.66
##
## Number of Fisher Scoring iterations: 5##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_PWD)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -2.3243 -0.8734 -0.4875 1.0041 1.9707
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -5.129187 0.462109 -11.10 <2e-16 ***
## chromosomeLength 0.056649 0.005176 10.94 <2e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 917.11 on 665 degrees of freedom
## Residual deviance: 752.69 on 664 degrees of freedom
## AIC: 756.69
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_SKIVE)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -2.0949 -0.8146 -0.4626 0.9584 2.2585
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -5.990212 0.483009 -12.40 <2e-16 ***
## chromosomeLength 0.064019 0.005593 11.45 <2e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 970.27 on 763 degrees of freedom
## Residual deviance: 788.24 on 762 degrees of freedom
## AIC: 792.24
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_KAZ)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.0743 -0.5927 -0.4657 -0.3384 2.5037
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -4.935580 0.611884 -8.066 7.25e-16 ***
## chromosomeLength 0.036915 0.006714 5.499 3.83e-08 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 481.68 on 585 degrees of freedom
## Residual deviance: 448.88 on 584 degrees of freedom
## AIC: 452.88
##
## Number of Fisher Scoring iterations: 5##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_CZECH)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.6211 -0.6599 -0.4998 -0.3007 2.4588
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -5.689363 0.910180 -6.251 4.08e-10 ***
## chromosomeLength 0.050303 0.009771 5.148 2.63e-07 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 240.36 on 228 degrees of freedom
## Residual deviance: 208.49 on 227 degrees of freedom
## AIC: 212.49
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_MSM)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -2.2329 -1.0478 0.5853 1.0309 1.6173
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -4.10028 0.90811 -4.515 6.33e-06 ***
## chromosomeLength 0.04856 0.01022 4.750 2.03e-06 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 231.73 on 167 degrees of freedom
## Residual deviance: 203.73 on 166 degrees of freedom
## AIC: 207.73
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = chrm.class ~ chromosomeLength, family = binomial(link = "logit"),
## data = Bivalent_1o2_MOLF)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.6931 -0.7183 -0.5326 -0.3092 2.2596
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -5.105488 0.658905 -7.748 9.3e-15 ***
## chromosomeLength 0.045408 0.007269 6.247 4.2e-10 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 455.53 on 422 degrees of freedom
## Residual deviance: 409.79 on 421 degrees of freedom
## AIC: 413.79
##
## Number of Fisher Scoring iterations: 4
Summary
When the SC lengths are divided by co number / class, – difference in direction of the logistic regression. I think the shorter 1CO bivalents in the high rec strain reflects the clustering of groups by SC length. (IE the scatter plots of SC length, binned by chrm class on the X).
Each point is a mouse average SC. When all bivalents are pooled, the logistic regression SC lengths predict the groups. When the data is divided by CO number, 1CO’s have a higher SC length in the low group - in the low group more chrms, including the longer ones have 1CO - whereas in the high group, only shorter chrms (SC) are in the 1CO class. For the 2CO class of bivalents - all the SC are longer, the high group averages were longer than the low.
and the mean 2COs SC are higher in the high strains (this must have something to do with the physical size effect)
If I want to try to use mouse nested in strain – I should use cell level metrics (but those have there own flaws)
Ideas for the above 3 tests,
- no difference in DOM
- no sig logistic regression test
- glm, strain effect?
Is sex a significant effect for SC length? (as predicted)
Sex is a significant effect for SC length The results seem to indicate that sex is a significant factor. Consider writing a sub sampling approach (randomize / permute a data set of BivData)
According to anova, sex effect explains most of the variance in single bivalent SC lengths.
The Long Biv Data set largely agrees with the full curated dataset
I caveat I haven’t addressed yet, is the XX in the female Biv data averages —
The mean SC logistic regression model for mouse averages
-10.1979118, 0.1331859
and for the single bivalent levels
0.2095246, 0.0039244
When all male mice are used, the predictive power is greater, than when just the Musc strains are used. When, just the Musc strain are used, The mouse mean SC is slightly significant in predicting if a mouse is in the high or low (should I consider running on female too?)
Is the prediction, high rec musc male strains have long SC met?
In a logistic regression, mouse average SC length is slightly predictive telling if a mouse is in a high or low Rec strain. I couldn’t get the Mixed models working for the male polymorphism predictions…
Q2 Normalized CO positions
Since there aren’t many good predictions for how the 1CO normalized landscape relates to gwRR variation, these will be the main questions
Has there been evolution in the 1CO pattern?
Is there a consistent pattern with the high rec strains?
Normalized 1CO foci positions will be used. (F1_PER). Check fixed effects of subsp and strains.
sis-co-ten, telomere and centromere distance of foci are metrics which draw from a wider pool of samples. (So maybe I will use them… but avoiding focus on them)
## Warning: Removed 1 rows containing non-finite values (stat_boxplot).## Warning: Removed 2 rows containing missing values (geom_point).
## Warning: Removed 1 rows containing non-finite values (stat_boxplot).## Warning: Removed 1 rows containing missing values (geom_point).
Remade the Position table. and MSM has a more telomeric distribution. MOLF has the most central distribution.
I think the plot shows that there are fewer 1CO for the High Rec group.
## Warning: glm.fit: fitted probabilities numerically 0 or 1 occurred## [1] 0.9097813## [1] 0.2379652The normalized Foci Positions are not significantly different between the high and low rec groups (full data set, mouse av and single bivalent level).
Summary
Not really a clear summary for the normalized 1CO position and rec groups.
Q2 IFD
this is the Q2 prediction for IFD / interference
prediction A, Is the Male polymorphism Prediction met? High rec strains have shorter IFDs?
B.1) Interfernce/IFD will be shorter in high Rec strains. Use IFD_PER to account for SC length differences.
glm across subsp
anova within subsp
logistic regression for musc (or all males)
## Warning: Removed 4 rows containing non-finite values (stat_boxplot).## Warning: Removed 4 rows containing missing values (geom_point).
The above plots are not the best at showing the pattern of higher rec group having slightly higher raw IFD - because their SC are longer on average. The normalized plot displays the pattern of higher rec group having slightly higher longer IFDs.
##
## Call:
## glm(formula = mean_IFD.2CO_ABS ~ subsp * strain, data = Male.poly.Mouse.Table_BivData_4MM)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -7.7614 -3.3285 -0.3448 2.7876 12.6333
##
## Coefficients: (18 not defined because of singularities)
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 47.9445 2.2048 21.746 <2e-16 ***
## subspMusc 3.5507 3.6004 0.986 0.3306
## subspMol 0.1004 3.3072 0.030 0.9760
## strainG 3.8170 2.7499 1.388 0.1736
## strainLEW 3.9088 3.1180 1.254 0.2181
## strainPWD 8.5103 3.6004 2.364 0.0236 *
## strainMSM 6.4044 3.4861 1.837 0.0745 .
## strainMOLF NA NA NA NA
## strainSKIVE 8.3345 3.4021 2.450 0.0193 *
## strainKAZ -3.4689 4.0254 -0.862 0.3945
## strainCZECH NA NA NA NA
## subspMusc:strainG NA NA NA NA
## subspMol:strainG NA NA NA NA
## subspMusc:strainLEW NA NA NA NA
## subspMol:strainLEW NA NA NA NA
## subspMusc:strainPWD NA NA NA NA
## subspMol:strainPWD NA NA NA NA
## subspMusc:strainMSM NA NA NA NA
## subspMol:strainMSM NA NA NA NA
## subspMusc:strainMOLF NA NA NA NA
## subspMol:strainMOLF NA NA NA NA
## subspMusc:strainSKIVE NA NA NA NA
## subspMol:strainSKIVE NA NA NA NA
## subspMusc:strainKAZ NA NA NA NA
## subspMol:strainKAZ NA NA NA NA
## subspMusc:strainCZECH NA NA NA NA
## subspMol:strainCZECH NA NA NA NA
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 24.3055)
##
## Null deviance: 1781.5 on 44 degrees of freedom
## Residual deviance: 875.0 on 36 degrees of freedom
## AIC: 281.24
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_PER ~ subsp * strain, data = Male.poly.Mouse.Table_BivData_4MM)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -0.069618 -0.018333 -0.002938 0.018642 0.084977
##
## Coefficients: (18 not defined because of singularities)
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 0.542597 0.016414 33.057 < 2e-16 ***
## subspMusc -0.017080 0.026804 -0.637 0.52802
## subspMol -0.013032 0.024621 -0.529 0.59985
## strainG -0.002548 0.020472 -0.124 0.90164
## strainLEW 0.012029 0.023213 0.518 0.60749
## strainPWD 0.079650 0.026804 2.972 0.00525 **
## strainMSM 0.045054 0.025953 1.736 0.09112 .
## strainMOLF NA NA NA NA
## strainSKIVE 0.115751 0.025327 4.570 5.54e-05 ***
## strainKAZ -0.005417 0.029968 -0.181 0.85757
## strainCZECH NA NA NA NA
## subspMusc:strainG NA NA NA NA
## subspMol:strainG NA NA NA NA
## subspMusc:strainLEW NA NA NA NA
## subspMol:strainLEW NA NA NA NA
## subspMusc:strainPWD NA NA NA NA
## subspMol:strainPWD NA NA NA NA
## subspMusc:strainMSM NA NA NA NA
## subspMol:strainMSM NA NA NA NA
## subspMusc:strainMOLF NA NA NA NA
## subspMol:strainMOLF NA NA NA NA
## subspMusc:strainSKIVE NA NA NA NA
## subspMol:strainSKIVE NA NA NA NA
## subspMusc:strainKAZ NA NA NA NA
## subspMol:strainKAZ NA NA NA NA
## subspMusc:strainCZECH NA NA NA NA
## subspMol:strainCZECH NA NA NA NA
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 0.001347089)
##
## Null deviance: 0.122045 on 44 degrees of freedom
## Residual deviance: 0.048495 on 36 degrees of freedom
## AIC: -159.78
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_ABS ~ strain, data = Male.poly.Mouse.Table_BivData_4MM)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -7.7614 -3.3285 -0.3448 2.7876 12.6333
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 47.94446 2.20479 21.746 < 2e-16 ***
## strainG 3.81697 2.74986 1.388 0.173649
## strainLEW 3.90881 3.11804 1.254 0.218064
## strainPWD 12.06096 3.11804 3.868 0.000442 ***
## strainMSM 6.50475 3.30719 1.967 0.056945 .
## strainMOLF 0.10039 3.30719 0.030 0.975952
## strainSKIVE 11.88519 2.88675 4.117 0.000214 ***
## strainKAZ 0.08182 3.60041 0.023 0.981995
## strainCZECH 3.55071 3.60041 0.986 0.330619
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 24.3055)
##
## Null deviance: 1781.5 on 44 degrees of freedom
## Residual deviance: 875.0 on 36 degrees of freedom
## AIC: 281.24
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_ABS ~ strain, data = Male.poly.Mouse.Table_BivData_4MM[Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Dom", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -7.761 -3.365 -1.198 4.777 12.633
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 47.944 2.595 18.473 3.24e-12 ***
## strainG 3.817 3.237 1.179 0.256
## strainLEW 3.909 3.670 1.065 0.303
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 33.68113)
##
## Null deviance: 593.53 on 18 degrees of freedom
## Residual deviance: 538.90 on 16 degrees of freedom
## AIC: 125.48
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_ABS ~ strain, data = Male.poly.Mouse.Table_BivData_4MM[Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Musc", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -5.7927 -3.2253 0.4061 2.2888 8.7418
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 60.0054 1.8783 31.947 1.75e-14 ***
## strainSKIVE -0.1758 2.4592 -0.071 0.94403
## strainKAZ -11.9791 3.0672 -3.906 0.00158 **
## strainCZECH -8.5103 3.0672 -2.775 0.01491 *
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 17.63917)
##
## Null deviance: 676.54 on 17 degrees of freedom
## Residual deviance: 246.95 on 14 degrees of freedom
## AIC: 108.22
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_ABS ~ strain, data = Male.poly.Mouse.Table_BivData_4MM[Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Mol", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -7.735 -0.250 1.027 2.280 2.837
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 54.449 1.927 28.25 1.3e-07 ***
## strainMOLF -6.404 2.726 -2.35 0.0571 .
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 14.85856)
##
## Null deviance: 171.183 on 7 degrees of freedom
## Residual deviance: 89.151 on 6 degrees of freedom
## AIC: 47.99
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_PER ~ strain, data = Male.poly.Mouse.Table_BivData_4MM)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -0.069618 -0.018333 -0.002938 0.018642 0.084977
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 0.542597 0.016414 33.057 < 2e-16 ***
## strainG -0.002548 0.020472 -0.124 0.9016
## strainLEW 0.012029 0.023213 0.518 0.6075
## strainPWD 0.062570 0.023213 2.695 0.0106 *
## strainMSM 0.032022 0.024621 1.301 0.2017
## strainMOLF -0.013032 0.024621 -0.529 0.5999
## strainSKIVE 0.098671 0.021491 4.591 5.2e-05 ***
## strainKAZ -0.022497 0.026804 -0.839 0.4068
## strainCZECH -0.017080 0.026804 -0.637 0.5280
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 0.001347089)
##
## Null deviance: 0.122045 on 44 degrees of freedom
## Residual deviance: 0.048495 on 36 degrees of freedom
## AIC: -159.78
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_PER ~ strain, data = Male.poly.Mouse.Table_BivData_4MM[Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Dom", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -0.069618 -0.022193 -0.004142 0.024264 0.084977
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 0.542597 0.019011 28.540 3.76e-15 ***
## strainG -0.002548 0.023712 -0.107 0.916
## strainLEW 0.012029 0.026886 0.447 0.661
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 0.001807185)
##
## Null deviance: 0.029624 on 18 degrees of freedom
## Residual deviance: 0.028915 on 16 degrees of freedom
## AIC: -61.349
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_PER ~ strain, data = Male.poly.Mouse.Table_BivData_4MM[Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Musc", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -0.038754 -0.014849 -0.000845 0.014289 0.042644
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 0.60517 0.01155 52.400 < 2e-16 ***
## strainSKIVE 0.03610 0.01512 2.387 0.031619 *
## strainKAZ -0.08507 0.01886 -4.511 0.000489 ***
## strainCZECH -0.07965 0.01886 -4.223 0.000851 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 0.0006669007)
##
## Null deviance: 0.0559623 on 17 degrees of freedom
## Residual deviance: 0.0093366 on 14 degrees of freedom
## AIC: -75.074
##
## Number of Fisher Scoring iterations: 2##
## Call:
## glm(formula = mean_IFD.2CO_PER ~ strain, data = Male.poly.Mouse.Table_BivData_4MM[Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Mol", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -0.06213 -0.00841 0.01417 0.02132 0.04058
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 0.57462 0.02066 27.814 1.43e-07 ***
## strainMOLF -0.04505 0.02922 -1.542 0.174
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for gaussian family taken to be 0.001707272)
##
## Null deviance: 0.014303 on 7 degrees of freedom
## Residual deviance: 0.010244 on 6 degrees of freedom
## AIC: -24.581
##
## Number of Fisher Scoring iterations: 2## Warning: glm.fit: algorithm did not converge## Warning: glm.fit: fitted probabilities numerically 0 or 1 occurred##
## Call:
## glm(formula = Rec.group ~ mean_IFD.2CO_PER, family = binomial(link = "logit"),
## data = Male.poly.Mouse.Table_BivData_4MM)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -2.0150 -0.4870 -0.1991 0.3942 2.8025
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -30.303 8.777 -3.452 0.000556 ***
## mean_IFD.2CO_PER 51.505 15.034 3.426 0.000612 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 58.574 on 44 degrees of freedom
## Residual deviance: 30.626 on 43 degrees of freedom
## AIC: 34.626
##
## Number of Fisher Scoring iterations: 6## Warning: glm.fit: algorithm did not converge## Warning: glm.fit: fitted probabilities numerically 0 or 1 occurred##
## Call:
## glm(formula = Rec.group ~ mean_IFD.2CO_PER, family = binomial(link = "logit"),
## data = Male.poly.Mouse.Table_BivData_4MM[Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Musc", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -2.417e-05 -2.110e-08 2.110e-08 2.110e-08 2.725e-05
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -1180 1283767 -0.001 0.999
## mean_IFD.2CO_PER 2038 2212381 0.001 0.999
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 2.2915e+01 on 17 degrees of freedom
## Residual deviance: 1.3284e-09 on 16 degrees of freedom
## AIC: 4
##
## Number of Fisher Scoring iterations: 25##
## Call:
## glm(formula = Rec.group ~ mean_IFD.2CO_PER, family = binomial(link = "logit"),
## data = Male.poly.Mouse.Table_BivData_4MM[Male.poly.Mouse.Table_BivData_4MM$subsp ==
## "Mol", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.13902 -1.06184 0.07054 0.74692 1.81847
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -19.22 15.08 -1.274 0.203
## mean_IFD.2CO_PER 34.69 27.08 1.281 0.200
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 11.0904 on 7 degrees of freedom
## Residual deviance: 8.4622 on 6 degrees of freedom
## AIC: 12.462
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = Rec.group ~ IFD1_PER, family = binomial(link = "logit"),
## data = male.bivdata.2CO_IFD)
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.7053 -1.1591 0.8338 1.1154 1.9156
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -1.8937 0.2442 -7.753 8.94e-15 ***
## IFD1_PER 3.3385 0.4097 8.149 3.66e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 1757.6 on 1267 degrees of freedom
## Residual deviance: 1683.9 on 1266 degrees of freedom
## (4 observations deleted due to missingness)
## AIC: 1687.9
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = Rec.group ~ IFD1_PER, family = binomial(link = "logit"),
## data = male.bivdata.2CO_IFD[male.bivdata.2CO_IFD$subsp ==
## "Musc", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -2.4046 0.4483 0.5623 0.6786 1.4537
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -0.9125 0.3915 -2.331 0.0198 *
## IFD1_PER 4.0587 0.6837 5.937 2.91e-09 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 677.59 on 685 degrees of freedom
## Residual deviance: 640.56 on 684 degrees of freedom
## (2 observations deleted due to missingness)
## AIC: 644.56
##
## Number of Fisher Scoring iterations: 4##
## Call:
## glm(formula = Rec.group ~ IFD1_PER, family = binomial(link = "logit"),
## data = male.bivdata.2CO_IFD[male.bivdata.2CO_IFD$subsp ==
## "Mol", ])
##
## Deviance Residuals:
## Min 1Q Median 3Q Max
## -1.6113 -1.1183 -0.5581 1.0986 1.7937
##
## Coefficients:
## Estimate Std. Error z value Pr(>|z|)
## (Intercept) -2.1537 0.6513 -3.307 0.000944 ***
## IFD1_PER 3.7986 1.1356 3.345 0.000822 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## (Dispersion parameter for binomial family taken to be 1)
##
## Null deviance: 259.1 on 186 degrees of freedom
## Residual deviance: 246.5 on 185 degrees of freedom
## (1 observation deleted due to missingness)
## AIC: 250.5
##
## Number of Fisher Scoring iterations: 4## [1] 1.970516e-17## [1] 6.871734e-07The t.tests return very significant p values for the normalized IFD between the high and low rec groups (for both mouse av and single bivalent observations levels).
Q2 Long Bivalent Dataset
Examine the pattern in the Long bivalent data set to get a feel for if the chromosome size effect skews the pattern. In the long bivalent data set, the longest bivalents (top 25%) from each cell are isolated, so they are more likely to be the same chromosome identities (Chrm1 to Chrm5). The section on IFD only looks at the 2CO bivalents.
table(droplevels(male.long.biv.2CO_IFD$strain) )
The plot above shows the normalized IFD measures from 2CO bivalents
There are many fewer long bivalent data observations, but the same positive correlation with
-table of long bivalents
glms
logistic regression
There are not enough observations for sub setting the data into strains or use the mouse averages.
Neither t.test are significant for both the ABS and PER when I test just the Musc strains. The above t.tests are breaking the knitr
The t.tests for IFD1s at the bivalent level for the high and low musc males are significant.
None of the logistic regression models for ABS or PER IFD lengths are significant, even when just the Musc strains are used.
Preliminary results from an independent data set indicated that PWD had longer IFDs, which goes against the simple prediction of more COs ~ denser spacing of foci on the same bivalent. This also indicated that interference distance may evolved in the house mouse complex.
Caveats
put all of the code chunks/analysis for caveats here
Chromosome Size Effect
I tried to isolate bivalents which are in the top quartille for SC length from their cells. (re think where this section should go)
Below are examples of plots of SC length distributions across cells. The top figure shows whole cell hand measured data and the bottom shows the Automated bivData from cells with at least 15 bivalents measured. Most plots excluded for space.
Each point is a bivalent plotted by cell on the x axis. X’s are the 4th quartile, big point is the mean and smaller black point is the median. I’m using these to compare the patterns of these statistics in the automated data set which is missing some bivalent data. (the extra stats are not correctly mapped)
## Warning: Removed 3 rows containing missing values (geom_point).## Warning: Removed 9 rows containing missing values (geom_point).
## Warning: Removed 9 rows containing missing values (geom_point).
## Warning: Removed 9 rows containing missing values (geom_point).
## Warning: Removed 1 rows containing missing values (geom_point).## Warning: Removed 41 rows containing missing values (geom_point).
## Warning: Removed 41 rows containing missing values (geom_point).
## Warning: Removed 41 rows containing missing values (geom_point).
All the plots above show the distributions of manually whole cell measured SC lengths compared to the SC length distributions from the automated bivalent data. It shows the amount of within cell variance across strains. There is a bit of variance across the SC length distributions in the PWD females.
This data set might be noisy, given the amount of variance in the SC length distributions across cells (PWD females, WSB females).
The DF real.long.bivData contains 713 bivalent measures. The full data set is 9807. This is the breakdown of bivalent observations by category for this long dataset are.
- Try to merge this DF with the whole.cell manual measures.
- Try estimating which ‘loose’ bivalent observations might be within the long class of bivalents.
in code chunk above I ran the mouse averages for the longest bivalents. (680 bivalents, from 54 mice. 10202 bivalents from 86 mice.
## Warning: Removed 3 rows containing missing values (geom_point).
These plots show the SC lengths for the ‘long SC data set’. They are supposed to be the longest 4-5 SC from cells where I could get good measures. These longer bivalents are useful because their patterns shouldn’t be affect by chromosome size effect (which effects, CO position). Hopefully this data set will have less noise from chromosome identity, but there was still data missing (they don’t come from whole cell measures).
Adjusting for XX
(rethink where this section should go) new outline
illustrate problem(affects mostly SC length)
- Expected impact on sex comparisons, estimated effect size of the X
(prove general pattern that ALL bivalents are longer), chrms sorted by bin comparisons
19 female, 19male, 20female 20 male
The female mouse averages should have adjustments for the XX. working on code to estimate the SC length from 3rd largest bivalent from female whole cell data across strains. Subtract this amount from the female mouse averages … This isn’t the best solution – since I can’t determine what proportion of cells for female mouse averages include the XX, (most cells are missing at least 3 bivalents)
Of all female single bivalents observations, 5% are XX (1 of 20).
The XX is large, likely within the top 25% longest bivalents of the cell (3rd largest by Mb).
The average % of XX for whole cell SC (sum(all bivalents)) can be calculated from the whole.cell data set. Lets guess 12% of a cell’s total SC area is XX.
I think a formula something like this can be applied to adjust for XX
- rate of bivalent segmentation /* rate of XX, 5% /* mean SC length for 3rd longest bivalent / total SC area (by bivalent) = proportion of SC area due to XX /*
Whole Cell Manual Comparison
The plots above show the mean SC lengths and 2SE error bars for single bivalents which have been given within cell rank.
The first plot showing the mean SC lengths by the rank (most all of these cells have 3, MSM has 5 cells (observations)).
The purpose of these plots is to display the variance of single bivalents when they are assigned a within cell rank. For the longest bivalents, XX is predicted to be the 3rd longest (according to physical length Mb).
(use the value for the 3rd bivalent to adjust the single bivalent traits for XX – then compare to males values – or re-run in the MM).
The other figure shows of each single bivalent contributes to the total SC area. Each column is a cell and each color is the percent of total SC area for the longest 5 bivalents in that cell. on average, each of the top longest bivalents make up ~10% of the cell’s total SC area. So for cells all 20 bivalents, of it’s total SC area, 5-7% is due to a XX,
Is the difference between cell averages for males and females less that 10%?
also interesting, the pwd and msm don’t have longer SC, compared to other strains.
Automated BivData Comparison
##
## WSB G LEW PERC PWD MSM MOLF SKIVE KAZ TOM
## 767 726 714 0 1031 550 0 0 0 0
## AST CZECH CAST HMI SPRET SPIC CAROLI F1 other
## 0 0 0 0 0 0 0 0 0
For the Automated data set, I like to measure the rate of passing bivalent per cell. The mean pass rate will be multiplied to the estimated XX mean_SC.
The table above shows the number of bivalents from the same strains as in the manual whole cell data. The plot shows the bivalent passing rate across all of the individual cells from this female data set. For each strain, I’ll calculate the mean bivalent passing rate (maybe I should look at the mouse levels).
(some of the mice have different ranges of per cell passing rate) - given this ranges, i think the xx adjustment factor should be called on the mouse level. (it could even be extended to cell level – except i don’t think the XX SC length estimates wont be good.)
strain.XX.adjustment.factor = per_cell_passing rate * 1 of 20 random biv will be XX *
** It might be simplier to compare the male and female means, and test it they are greater than the whole cell proprotion of the XX in females cells.** The XX in a whole female cell contributes ~ 7% of total SC, if the female means for a type of total SC measure are from XX. But I am not using ‘whole cell’ summaries to compare female and males.
What is the effect of an extra XX-autosome on single bivalent means?
use a permutation approach: Make a True data set to start with, same(similar) number of cells, mice and bivalents. Make fake data sets which sample 19 bivalents, for ‘in silico’ cells for males and females. Also Run cntrl-female data set, where 20 bivalents are sampled, but randomly. Run the same bivalent level summaries for each ‘permuted data set’; male avSC, 19Female_avSC, and rand.20_Female_avSC. The difference between the rand.20 and rand.19 female -permuted data sets should indicate the influence of having an extra ‘XX-autosome’ in the total data set.